ok here's a tutorial that was posted by vis
1.) Open WPE Pro and go into cokestudios. Make sure to only have the CD you want to make into a filter in your backpack (If you have another, simply put it on the ground) Also it's easier if your in your room alone.
2.) Now Target Internet Explorer like you normally would when using a filter. Now go to cokestudios and make sure your standing infront of a CD playing device. (Not Your CD Burner)
3.) Go back to WPE Pro and hit the play button at the top. (Right under where you target programs) Now go to cokestudios and play your song. Let the song play all the way. (Do not stop performing) Now when song is done; go back to WPE and hit the stop button at the top. This will bring up a small window for WPE Pro.
4.) Now look in the right side of the coloums to where it says # EDLLIST..... etc. (dont copy the one starting with # EDPLAY) Copy the code into a processor like notepad. Okay now click on that coloum now as you can see the code gets cut off. You can see some of the ending; its soppose to say c=(your name). Make sure to put a period after your name. Also make sure you use the correct capitals and dashes (the way your name is when in cokestudios) Ex: name =MadCoke Id put MadCoke and not madcoke.
[attatchment 1]
Basic Song Filter Code:
# EDLLIST .x=45.i=(Artist Name)_(The Song Code).t=(Song Name).c=(Artist Name).
Make sure to put a period after you put the Artist Name the 2nd time.
Example:
# EDLLIST .x=45.i=-MadCoke-_4C41C36925339A119C12B264AA8B2722.t=SongFiltering. c=-MadCoke-.
5.) Ok now you have to copy and paste your code into a hex converter. Here is a Hex Conveter you can use
http://nickciske.com/tools/hex.php. Copy your code into the left side of the Hex Converter. Then hit the encode button.
6.) Copy and paster the hex code into Notepad, Word, etc. Now go through the code: Change all 2E codes into 0D codes. (Note: all the 0 are zeros not the letter O) Also delete all the % signs and the 00 at the end. (They are not needed).
7.) Now go back to WPE Pro and make the filter. Double click the filter titled "Filter 1". A window should come up. In this window click advance in the buttom right hand corner.
[attachment two]
8.) Now its time to make your Song Filter. At the top type in the 13 hex codes: 23 20 53 54 52 49 50 49 4E 46 4F 20 0D. This code is the same when ever you make any filter.
9.) Now in the bottom part; the "Yellow" code bars place the hex code you did for your song.
a.) You can either type in every code one by one
b.) Or you can use ShortKeys. Simply open Shortkeys; make a new ShortKey and copy the code into the Shortkey you make. (Example: ShortKey = 9 Now when I place the code for my song filter in there and hit OK, when ever i type in 9 my code will come up instead.) So now in the 1st yellow code bar type in your shortkey and now the whole code is already in the bars and you dont have to waste your time and type the codes in one by one.
10.) Now hit apply and save the filter to somewhere you'll remember. And now your done with your AutoSong Filter.
11.) Open the song filter you just made. Make sure to target internet explorer. Now go open your backpack and the list for your song will come up (Note: Someones song must be in play) Also if your in world view you can kik ppl out of line by hitting the cancel button.
How To Make A filter??? -
08-07-2006, 09:36 AM
Hybrid Mode
